Nova Tec

Теплотехническая продукция, строительно-отделочные машины, бестраншейные технологии

Nova Tec

Теплотехническая продукция, строительно-отделочные машины, бестраншейные технологии

Сonstruction and finishing machinery

More than 50 years “Gydroprom” LLC which was the “Odessa`s plant of construction-finishing machinery” plc. produce high-quality construction and finishing machinery for treatment of wooden, tile and concrete floors. The goods of plant were awarded by medals and diplomas many times on international exhibitions. The quality and performance of equipment are confirmed by results of tests for correspondence to world standards.

COLIBRI CO-401 with long polishing heads

Purpose : for polishing parquet and other wooden floors

The machine CO-401 is designed for polishing boundary areas of parquet and other wooden floors, steps, spaces near walls and under central heating radiators, and other places with restricted access - so-called “Dead space”.
The machine has a single-phase drive (a. c. mains, 220 V, 50 Hz).
The parquet-polishing machine CO-401 stands out in the row of other machines due to such features as: lightness, compactness, great suction capacity, high security level, and attractive design.
Interchangeable nozzles are used for reaching spaces with limited access.
The surface polishing is carried out with the help of a sanding disc, 150mm in diameter.
The material used for mounting the disc on the machine - Velcro - allows to replace the old disc with a new one very easily.
СО-401 complies with safety requirements, ensuring protection from the electric shock. This machine does not require additional earth connection or use of the protection cutoff device (PCD).
Sanding disc is mounted on the bottom side of the interchangeable nozzle.
The machine is supplied with two nozzles – with long and short polishing heads. For treatment of boundaries and steps it is sufficient to use the short polishing nozzle. The long nozzle is designed for polishing spaces with most difficult access, e.g. under central heating radiators.
Pitch adjustment of the sanding disc with respect to the polished surface is achieved by the adjustment of two rear rollers. Sawdust produced during polishing is exhausted into a dust collector.


Compare
    • Efficiency (m²/h)5
    • Polishing width (mm)150
    • Drum diameter (mm)150
    • Nominal rotating speed with lifted up drum (rpm)3400
    • Operating voltage (V)220
    • Electric motor power (kW)1.2
    • Machine power consumption (kW)0.92
    • Overall dimensions (mm)630х246х410
    • Weight (kg)10