Nova Tec

Теплотехническая продукция, строительно-отделочные машины, бестраншейные технологии

Nova Tec

Теплотехническая продукция, строительно-отделочные машины, бестраншейные технологии

Catalog trenchless equipment

PT-95 AR

Purpose : Reverse punch

The reverse IP4605АР punch is designed to punch through and blind horizontal and inclined wells Ø95мм, through horizontal and inclined wells Ø180мм (with extender) in compacted soils.
The use of pneumatically controlled reverse has the following advantages:
— to perform work on the excavation of just one employee, because the control unit near the operator pit;
— managing pneumodevices is very simple and does not require additional training;
— there is a possibility in the event of an emergency situation immediately to switch the machine on reverse and return to the sump simply by switching dispenser on the management node.


Compare
    • The diameter of the punched wells without expander (mm)95
    • The diameter of the punched holes with a reamer (mm)180
    • Length of the punched wells (m)20 – 40
    • Extension when re penetration (mm)140, 160, 180
    • The rate of penetration (m/s х 10⁻³)0.28 – 15
    • The outer diameter of the driven pipes (mm)
    • Length hammered pipe (m)
    • Diameter tighten p/e of pipe (mm)63, 75, 90, 110, 125, 140, 160
    • Driving speed (m/s х 10⁻³) from soil
    • The energy of a single blow (7 MPa) J150
    • Impact frequency (Hz) ud. min5.5 (330)
    • Working pressure of compressed air (MPa)0.6±0.1
    • Air consumption (m³/min)2.3
    • Length without extender and sleeveless (mm)1600
    • Diameter without extender and sleeveless (mm)95
    • Weight without hose (kg)58