Parquet sanders and concrete sanders
Our product – This is high-quality professional equipment for processing floor surfaces. Choosing Novatek you choose – Traditional technology from German engineers
Depending on the model, different working elements are used: a grinding drum (DRUM POWER), an endless grinding belt (BELT HD) or a grinding disc (COLIBRI).
Specialized machines for craftsmen who are engaged in parquet restoration and complex finishing of wooden, concrete and mosaic floors.
Has a three-phase motor and is equipped with a RCD (residual current device). Equipped with two traverses that rotate in different directions for stabilization. Uses six triangular abrasive stones or diamond cutters. Grinding of concrete surfaces is carried out with the addition of water.
TERRAZZO (CO199) is intended for grinding mosaic and concrete floors. It is used in both industrial and residential civil construction.
Has a three-phase motor and is equipped with a RCD (residual current device). Equipped with two traverses that rotate in different directions for stabilization. Uses six triangular abrasive stones or diamond cutters. Grinding of concrete surfaces is carried out with the addition of water.
TERRAZZO (CO199) is intended for grinding mosaic and concrete floors. It is used in both industrial and residential civil construction.
Lightweight, portable, high power. Both models have a single-phase drive (220 V, 50 Hz). Sanding with a 150 mm diameter disc. Wood dust is sucked in by a built-in vacuum cleaner. Does not require additional grounding.
Designed for processing corner areas of parquet floors, steps, places under radiators and other “dead zones”.
Set 1 (CBR.011.220.401.01 – short nozzle):
Set 2 (CBR.011.220.401.04 – long nozzle):
Has a three-phase motor and is equipped with a RCD (residual current device). Equipped with two traverses that rotate in different directions for stabilization. Uses six triangular abrasive stones or diamond cutters. Grinding of concrete surfaces is carried out with the addition of water.
Intended for grinding mosaic and concrete floors in industrial and civil construction.
Single-disk design with a large working disk diameter of 406 mm. Operates from a standard single-phase network (230–240 V). Has a powerful 3000 W electric motor. Characterized by a relatively low noise level (up to 80 dB) and vibration (up to 70 m/s²).
Intended for sanding parquet and other wooden floors after their preliminary planing. Additionally used for floor repair, mastic and paint removal.
Do you have any questions about our products? Need advice? We are always ready to help you make the right choice. Leave a request, and our specialists will contact you as soon as possible to provide all the necessary information.
We will contact you within 24 hours of receiving your letter during business hours
Error: Contact form not found.
