Odessa Plant of Construction and Finishing Machines, has been producing equipment for drilling wells, plugging and replacing pipes for over 40 years, which is supplied to European markets.
Trenchless technologies allow you to lay and repair communications with minimal costs and without surface restoration.
Advantages of trenchless technologies
Precision and process control
Hydroprom machines provide a uniform direction of movement even in difficult soils. This guarantees safe pipe laying without damaging existing communications
Minimal environmental intervention
Work is carried out from the starting and receiving wells without digging the surface. Roads, sidewalks and green areas are not disturbed, which is especially important in urban areas.
High economic efficiency
The trenchless method reduces time and costs by 2–3 times compared to traditional work. The absence of excavation and resurfacing ensures a quick return on investment.
Versatile application
One set of equipment allows you to perform a full cycle of work – from drilling a well to pulling pipes of various diameters in any type of soil.
More details
Purpose of equipment
Trenchless machines are used for:
Forming through and blind horizontal, inclined and vertical wells with a diameter of 55–155 mm;
Forming through wells with a diameter of up to 300 mm (with a reamer) with simultaneous threading of polyethylene pipes 63–250 mm;
Driving steel pipes (open or closed end) with a diameter of 63–1420 mm into the soil or into a pre-drilled well;
Forming asbestos-cement, concrete and reinforced concrete pipelines and piles;
Loosening compacted materials and deep compaction of sedimentary soils;
Knockout of steel pipes with an internal diameter of 40–120 mm;
Pipe pulling when replacing or reconstructing underground utilities.
* WELL DRILLING MACHINES
ІП 4610
Design features
Reversible mechanism for changing the direction of movement (forward/backward);
Increased penetration accuracy due to directional start;
Operates from a compressor or mobile station;
Optimum for urban conditions – without opening the road surface.
Component:
Component:
Impact assembly
Hose Ø 16 mm (40 m)
Tools and accessories
Spare parts kit
ІП 4610
Description and capabilities:
The machine is designed for drilling through and blind horizontal, inclined and vertical wells Ø 56 mm in dense soils. It is also used for forming micropiles, compacting sedimentary soils, and loosening bulk materials.
Possibility of simultaneously threading polyethylene pipes Ø 70 mm;
Resistant to abrasive soils;
Easy maintenance.
Component:
Impact assembly
Expander Ø 180 mm
Stepped nozzle
Hose (40 m)
Tools
Spare parts
ІП 4605А
Description and capabilities:
Reversible pneumatic drill for drilling horizontal and inclined wells Ø 95 mm (up to Ø 180 mm with an expander). Used for trenchless laying of communications.
Reversible pneumatic drill for drilling holes Ø 130–200 mm and driving steel pipes Ø 100–120 mm. Suitable for replacing old pipes, compacting soils, and forming piles.
Do you have any questions about our products? Need advice? We are always ready to help you make the right choice. Leave a request, and our specialists will contact you as soon as possible to provide all the necessary information.
We will contact you within 24 hours of receiving your letter during business hours
